Massoth 8210084 eMotion XLS Saxonian 1V/K ~Loco

Massoth 8210084 eMotion XLS Saxonian 1V/K ~Loco

Price:£205.00
Add to Basket:

New 2018 Software version eMOTION XLS

eMOTION XLS Sound Decoder
Powerful 3 Amp Sound Decoder with up to 6 sound channels and 13 function outputs. Usable for locomotives with up to two motors.



NEW VERSION INCLUDES THE FOLLOWING FEATURES:
BREAK ON DC
Breaking with a special polarized DC-Voltage
VOLUME CONTROL OF EACH OPERATION SOUND TYPES
These 4 operation sound types can be adjusted seperately:
  • Initial start sequences
  • Standing sound sequences
  • Shut down sequences
  • Operation sound sequences
LGB® OR SUSI INTERFACE INTEGRATED.

The new eMOTION XLS Sound Decoder is the up and coming standard of the exquisite garden model railroad sound decoders. The XLS features a powerful output stage for up to two motors (3 AMPS) as well as 1 AMP for sound, light, and other functions. 
Additionally, 11 function outputs including 3 light outputs and 4 contact inputs are available which makes this unit exceptionally feasible. 
The integrated sound power amplifier with 6 independent sound channels sets the standard in today's locomotive sound simulations. The audio power amplifier delivers 1 watt (sinus) at 8 ohms impedance. The eMOTION XLS Sound Decoder delivers optimum characteristics for analog and digital operation.

Optimized Analog- and Digital operation guaranteed
The XLS works in analog mode starting at the lowest voltage possible. The settings and functions of the decoder may be set with the DiMAX PC Module and may be used in analog mode. Thus sounds may be triggered in analog mode via reed contacts. 
Once again we would like to point out that sound- and software updates can only be performed with the DiMAX PC-Module (8175001) 

NMRA DCC and LGB® MZS
The eMOTION XLS is compatible to NMRA/DCC and works with all generations of the LGB® MTS systems. State of the art DATAFLASH technology and the latest programming procedures enable the reloading of sounds and software directly via the track.

ORIGINAL SOUND in digital quality

The XLS is delivered with a HiFi loudspeaker (57 mm) with a metal cap and an interface cable for LGB® and Aristocraft DCC. The unit may be installed wire by wire as well. Mounting material is provided.

Technical Data Drive Decoder:
- NMRA/DCC compatible
- LGB® MTS I, II, and III compatible
- best driving characteristics with analog op. (selectable)
- 14, 28, and 128 Speed Steps
- 256 internal speed steps
- 10239 Locomotive Addresses
- Automatic Detection of operating mode and speed steps setting
- 3.0 Amps max. continuous output (drive stage)
- 4.0 Amps max. maximum total output (incl. functions)
- Adjustable Motor frequency
- Load Control in digital and analog
- Switching Speed (programmable)
- Adjustable Motor driving curve

Technical Data Sound Amplifier:
- 6 independent sound channels
- High end amplifier stage with 1 Watt output (sinus)
- Loudspeaker connection with 8 Ohms impedance
- Sound Storage Capacity up to 150 sec.

Technical Data Function Outputs:
- 3 Light outputs (front, rear, internal 0.3 Amps each)
- 6 Function outputs (0.6 Amps each)
- Programmable Special Functions
- Suitable for Power Buffer connection
- 1 Amp max output of all function outputs
- Intelligent function mapping up to F16
- Parallel and serial data processing (LGB® MTS Pulse Chain Control)
  and automatic detection (serial data processing disengageable)
 

Delivery

We will endeavor to dispatch your goods as soon as possible on receipt of your order and acceptance by us.

Orders of small items which will go by post office will be despatched the same day or the next when ever possible.

Orders for larger items  made on Friday or the weekend and Bank Holidays will be dispatched within 48 Hours of Trading resuming.

These times are guide lines and if possible will be sooner but we do not have control over the carriers if it takes a little longer. Please Note some areas of the UK are not covered for Saturday deliveries.

All Goods will be delivered to the address given by you so please make sure you fill in your details correctly. We are not responsible for mistakes made by yourselves or delivered to a neighbour or other place if requested by you.

Once you have taken delivery of your items you have 48 hours to notify us in writing or email if anything is defective, damaged or parts missing.

If the Packing is damaged by the Carriers it mut be signed for as such or you will not be able to make a claim.             

Shipping  Costs

Shipping  costs are shown when you get to your purchase. This does not cover islands and Highlands so you will be contacted with the increased cost.

Cancellation and Returns


If you wish to cancel an order before it has been dispatched then you must contact us immediately. If you do not and the goods are dispatched you will be liable for all shipping charges Outward  and Return.

In accordance with the EU Distance Selling Directive you have a seven working day period starting from the day you receive your order in which you can return any products for a refund. Part built, started ,run, flown items or opened boxes are not covered by this and will not be excepted. All returned items must be in original unopened boxes.You must inform us in writing or email before the end of this period. The products must then be returned within this 7 day period, unopened and in their original condition. Charges will apply if any parts are missing ,altered , modified, swapped or damaged. If the goods are in a sealed box or package the seal must still be intact or the refund will not be accepted. You are responsible for insurance and return delivery costs.

We will endeavor to make any credits within 28 days of your original purchase date most are done within 3 working banking days .

Secure Payments
Payment methods
Contact
P and S Hobbies and Models Ltd
32 Castle Road Scarborough
North Yorkshire
YO11 1XE
01723-377020